Mercedes-Benz 2013 E Class Coupe - Manual (Page 153)

X Turn the SmartKey to position 2 in the
ignition lock ( Y page 159).
X Press the à button.
X Press climate mode selection button G up
or down and select the desired level
(
Y page 147)
Setting the temperature
Dual-zone automatic climate control
Different temperatures can be set for the
driver's and front-passenger sides.
X Turn the SmartKey to position 2 in the
ignition lock ( Y page 159).
X To increase/reduce: press temperature
selection switch E or H up or down
(
Y page 145).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
3-zone automatic climate control
Automatic climate control zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the rear compartment.
X Turn the SmartKey to position 2 in the
ignition lock ( Y page 159).
X To increase/reduce the temperature in
the front compartment: press
temperature selection switch F or J up
or down (
Y page 147).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
X To increase/reduce the temperature in
the rear compartment using the front
control panel: press the á button.
The indicator lamp above the á button
goes out.
X Press temperature selection switch F or
J up or down (
Y page 147).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
X To increase/reduce the temperature in
the rear compartment using the rear
control panel: press the r or s
button on the rear control panel.
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
Setting the air distribution
Air distribution settings
P Directs air through the center and side
air vents
O Directs air through the footwell air
vents
S Directs the airflow through the center,
side and footwell air vents (USA only)
¯ Directs air through the defroster vents
b Directs the airflow through the
defroster, center and side air vents
(Canada only)
a Directs air through the defroster and
footwell vents
i Regardless of the air distribution setting,
airflow is always directed through the side
air vents. The side air vents can only be
closed when the controls on the side air
vents are turned downwards.
Operating the climate control systems
151
Climate control