The on-board computer, Changing the light settings, On-board computer and displays – Mercedes-Benz 2013 E Class Coupe User Manual
Page 252: Menus and submenus
X
Press the : or 9 button to select the
Permanent Display
function.
You will see the selected setting
Outside
Temperature
or
Additional
Speedometer [km/h]
/
Additional
Speedometer [mph]
.
X
Press the a button to save the setting.
i
The speed is displayed in km/h/mph
according to the setting.
Lights
Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrument cluster, in the
displays and the controls in the vehicle
interior can be adjusted using the
Brightness Display/Switches:
function.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Brightness Display/Switches:
function.
You will see the selected setting.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from
Level 1
to
Level 5
(bright).
X
Press the a or % button to save the
setting.
If the light switch is set to Ã, T or
L, the brightness is dependent upon
the brightness of the ambient light.
i
The light sensor in the instrument cluster
automatically controls the brightness of
the multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching the daytime running lamps on/
off
i
This function is not available in Canada.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Day
Lights
function.
If the
Day Lights
function has been
switched on, the cone of light and the
W symbol in the multifunction display
are shown in orange.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-.
function.
You will see the selected setting.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from
Off
to
Level
5
(bright).
X
Press the a or % button to save the
setting.
Setting the ambient lighting color
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Ambient Light Color
function.
250
Menus and submenus
On-board computer and displays