Connecting video source devices – Optoma FX5200 User Manual
Page 19
EN-19
Connecting Video source devices
You can connect your projector to various Video source devices that provide
any one of the following output sockets:
HDMI
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one
of the above connecting methods, however each provides a different level of
video quality. The method you choose will most likely depend upon the avail-
ability of matching terminals on both the projector and the Video source
device as described below:
Note
Not all models have HDMI input jack, please check your projector before connecting
Terminal name Terminal appearance
Reference
Picture quality
HDMI
HDMI
“Connecting an
HDMI source
device” on
page 20
Best
Component
Video
VGA1-IN/YPbPr or
VGA2-IN/YPbPr
“Connecting a
Component Video
source device” on
page 18
Better
S-Video
S-VIDEO
Good
Video
VIDEO
Normal