Optoma FX5200 User Manual
Page 34
EN-34
devices.
On: Assign an IP address to the projector from an external DHCP
server automatically.
Off: Assign an IP address manually.
IP Address: Select an IP address.
Subent mask: Select subnet mask number.
Gateway: Select the default gateway of the network connected to the
projector.
DNS: Select DNS number.
Apply: Press "
" and then choose "Yes" to apply the selection.
Wireless
This setting is only for wireless module use.
Wireless is only functional with VGA 1 connector.
3D Mode
On: Enable 3D Mode function.
Off: Disable 3D Mode function.
When 3D Sync is set to "On", the settings for input source or broadcast
device are required as below:
1. For S-VIDEO and VIDEO input source, signal type should be NTSC (60).
2. For computer input source, the hardware and software requirements
should be Windows 7 operating system, 3D videos and professional 3D
video player softwares. Computer's output frequency should be 120Hz
and display card should be higher than NVIDIA 9800.
3D Sync Invert
On: Invert left and right frame contents.
Off: Default frame contents.