Optoma X402 - Manual (Page 47)

47
English
User Controls
Change Password
First time: `
Press “Enter” key to set the password. 1.
The password has to be 4 digits. 2.
Use number button on the remote or on-screen numeric key- 3.
pad to enter your new password and then press “Enter” key to
confirm your password.
Change Password: `
(If your remote does not have a number keypad, please use
the up/down arrows to change each digit of the password,
then press enter to confirm)
Press “Enter” to input old password. 1.
Use number button 2. or on-screen numeric keypad to enter cur-
rent password and then press “Enter” to confirm.
Enter new password (4 digits in length) using the number but- 3.
tons on the remote, then press “Enter” to confirm.
Enter new password again and press “Enter” to confirm. 4.
If the incorrect password is entered 3 times, the projector will `
automatically shut down.
If you have forgotten your password, please contact your local `
office for support.
Pass-code default ™
value is “1234” (first
time).