User controls, How to use web browser to control your projector – Optoma X402 User Manual
Page 49
49
English
User Controls
How to use web browser to control your projector
Turn “On” the DHCP option on projector to allow a DHCP
1.
server to automatically assign an IP address.
Open the web browser in your PC and type in the projector’s
2.
IP address (
Network: LAN Settings > IP Address).
Enter the user name and password, and click “
3.
Login“.
The projector’s configuration web interface opens.
Making a direct connection from your computer to the
projector*
Step 1: Turn “Off” the DHCP option on project.
Step 2: Configure the IP address, Subnet Mask, Gateway, and
DNS on projector (
Network: LAN Settings).
Step 3: Open Network and Sharing Center page on your PC, and
assign the identical network parameters to your PC as set on
projector. Click
OK to save the parameters.
Step 4: Open the web browser on your PC and type in to the URL
field the IP address, assigned in step 3. Then press “
Enter” key.
The default user
name and pass-
word is “
admin”.
*The steps in
this section base
on Windows7
operating system.