MIPRO ma101 - Manual (Page 10)

1. Grille & Screen Assembly: Protects the mic capsule from structural
damage as well as "POP" noise.
2. Capsule Module: It is mainly for protecting the capsule and eliminating
the "POP" sound. This is the main component to transform sound into AF.
3. Anti-Roll Color Ring: Molded polygon shape prevents rolling on flat
surfaces. A variety of colors are available to make Transmitter
identification easy, even at a distance.
4. Microphone Cartridge: Transforms the acoustic signal into an electric
signal.
5. Housing: Durable rubber velvet finish for handling comfort. Upper
portion to be connected to capsule module. Internally, it holds transmitter
PCB and battery compartment.
6. Battery Status Indicator: A brief flash at turn-on indicates that the battery
is OK. No flash at turn-on indicates that the battery is either drained or
not installed correctly. After power-on, a constant glow indicates a weak
battery that should be replaced.
7. Power On-off Switch: Slide up to turn the Transmitter on and slide down
to turn the Transmitter off.
8. Battery Compartment: Accepts a standard/universal 9-volt any type of
battery.
9. Battery Cap: Unscrew battery cap in a counter clockwise direction to
provide access to the Battery Compartment.
HANDHELD WIRELESS MICROPHONE
PART NAMES AND FUNCTIONS
- 7 -
(Fig.1)
1 4 3 7 6 5
O
N
O
F F
O
N
O
F F
9 8
2 5 6 7 8 9