ABUS Technologies DP Series Smart Pressure Transmitter User Manual
Page 7
ABUS TECHNOLOGIES INC.
M94
7
Mounting Orientation Effect:
Zero drifts no more than 0.24kPa. No effect for movement
parallel to diaphragm. The error could be resolved by quick Zero
reset pushbutton on the instrument.
Power Voltage:
12V ~ 45V DC
Intrinsically safe/explosion-proof products with max 30 VDC
should be powered by safe Barrier
Parameters for intrinsically safety: U
0
≤ 28V DC,
type outsourcing safe barrier
I
0
≤ 30mA
P
0
≤ 0.84W
Physical Parameters:
O Ring of Contacting Medium:
Viton / Glass Filled PTFE
Filling liquid:
Silicone Oil / Inert Gas
Bolt:
Cadmium plated carbon steel.
Outer shell or electronic circuit:
Low Cu Al.
O shaped seal ring:
Acrylotrile-butadiene rubber, fluorine rubber polyurethane.
NOTE: Please refer to Ordering Table for Flange connector, Exhaust/Vent valves and Isolation
Diaphragm Material options
Pressure Connection Part:
¼ - 18 NPT for joint thread in pressure room,
½ - 14 NPT for joint thread in pressure guiding joint.
Weight:
Basic Model, 2.4Kg
Operation Environment under Normal Conditions
Operation Temperature(Ambient): Smart Type:-20°C ~ +85°C.
Storage Temperature:
-40°C ~ +104°C
Humidity:
0 ~ 90%
Atmospheric Pressure:
86 ~ 106 kPa
Operation Environment Conditions for Explosion-Proof Product
Humidity:
-20°C ~ +40°C
Relative Humidity:
5% ~ 95%
Atmospheric Pressure:
86 ~ -106 kPa