Applied Motion PDO5580 - Manual (Page 2)

-2-
Introduction
Thank you for selecting an Applied Motion Products motor control. We hope our
dedication to performance, quality and economy will make your motion control
project successful. If there’s anything we can do to improve our products or help you
use them better, please call or fax. We’d like to hear from you. Our phone number is
(800) 525-1609 or you can reach us by fax at (831) 761–6544.
Features
• Digital oscillator provides smooth accel/decel ramps and precise speed control.
• Powerful microstepping amplifier provides high torque and smooth, quiet motion.
• Accepts a wide range of motors: NEMA sizes 14 - 42, 0.5 to 5.5 amps/phase.
• Easy to configure with on-board switches and potentiometers for all settings.
• Automatic idle current reduction reduces motor and drive heating, saves power.
• Pluggable screw terminal connectors make wiring easy.
• Oscillator Mode operates from internal pots, external pots, 0 - 5 V analog signal,
or analog joystick.
• Two speed ranges, can be selected “on the fly” by a digital signal with automatic
ramping between speeds.
• Inputs and outputs are optically isolated, differential (sourcing or sinking). Speed
& Enable 5 - 24V, Step & Direction 5 - 12V.
• Tach Out signal allows easy measurement of speed.
• Enable input allows motor current to be shut off on command.
• Built in 80 volt power supply (accepts 110 or 220 VAC power, 50-60 Hz)
• MOSFET pulse width modulation switching amplifiers (3 state)
• Microstepping pulse & direction mode with 16 step/rev settings from 200 (full
step) through 50,800.
• Overtemp and overcurrent (short circuit) and surge protection
• Built-in self test for troubleshooting.
• CE and TUV compliant.
-23-
Technical Specifications (continued)
Recommended
Joystick
Speed Ranges
Physical
Connectors
CE Mark
Maurey Instrument Corp., Chicago, IL (773)581-4555
JS31462S5T3 (2 axis) or SAJ2515-F-502 (1 axis)
LO speed range: 0 - 5 rev/sec
HI speed range: 0 - 25 rev/sec
Accel/decel range: 1 to 250 rev/sec/sec
Constructed with black anodized aluminum heat sink and heavy
gauge steel housing. 3 x 5.3 x 8 inches overall. 7.8 lbs. Ambient
temperature range: 0 - 70 C. Power, temp and motor short circuit
LEDs. Mounting brackets and switch cover included. See back
cover for detailed drawing .
European style, pluggable screw terminal blocks.
Motor: 4 position. Wire size: AWG 12 - 28.
Signal Input/output: 8 position. AWG 16 - 28.
AC Input: 3 position.Wire size: AWG 12 - 28.
Complies with EN55011A, EN50082-1(1996), EN50178 (1997).