Applied Motion BD10-H4-AH - Manual (Page 5)

5
BD5/10 Drive Hardware Manual 920-0065D
2/14/2014
Features
• Velocity modes controlled via analog input, digital input or on board trimpot
• 0 - 4500 rpm continuous, 5000rpm peak.
• Acceleration rate set by on board trimpot.
• Power supply: 12-48VDC
• Current output:
BD5-G1-AH 1.75Arms cont/3.5Arms peak (5 sec max)
BD5-G2-AH 3.5Arms cont/7Arms peak (5 sec max)
BD5-G3-AH 6.25Arms cont/12.5Arms peak (5 sec max)
BD5-H2-AH 3.2Arms cont/6.4Arms peak (5 sec max)
BD10-H4-AH 6.9Arms cont/13.8Arms peak (5 sec max)
BD10-H5-AH 4.5Arms cont/9.0Arms peak (5 sec max)
BD5-I6-AH 5.0Arms cont/10.0Arms peak (5 sec max)
BD10-I7-AH 10Arms cont/20Arms peak (5 sec max)
BD10-I8-AH 7.5Arms cont/15Arms peak (5 sec max)
• Motors Currently Offered:
BL030-H03-G, 42MM, 30W, 24V
BL060-H03-G, 42MM, 60W, 24V
BL090-H03-G, 42MM, 90W, 24V
BL060-H03-H, 57MM, 60W, 24V
BL120-H03-H, 57MM, 120W, 24V
BL180-H04-H, 57MM, 180W, 48V
BL100-H03-I, 80MM, 100W, 24V
BL200-H04-I, 80MM, 200W, 48V
BL300-H04-I, 80MM, 300W, 48V
• Protection against over voltage; under voltage; over temperature, short circuit(phase to phase, phase to
ground), bad Hall signal
• Inputs & Outputs
one 0-5V analog input
eight 5-24V single-ended digital inputs, can be configured for sinking or sourcing
two differential digital outputs
all digital inputs and outputs are optically isolated
• Compact size: 100×65×30mm
• Available with nine performance matched, BLDC motors: 30 to 300 watts continuous output.
• CE pending and RoHS compliant