Applied Motion BD10-H4-AH - Manual (Page 8)

8
BD5/10 Drive Hardware Manual 920-0065D
2/14/2014
Drive Mounting
You can mount your drive on the narrow side of the chassis using #6 screws. The drive should be securely fas-
tened to a smooth, flat metal surface that will help conduct heat away from the chassis. If this is not possible, then
forced airflow from a fan may be required to prevent the drive from overheating.
• Never use your drive in a space where there is no air flow or where the ambient temperature exceeds 40ºC.
• Never put the drive where it can get wet.
• Never allow metal or otherwise conductive particles near the drive.
65
100
96.34
30
3.66
4.20
23.9
4.0
Dimensions are in millimeters