CIRCUTOR AR5L Series - Manual (Page 26)

26
5.2.3.2.- Zoom.
This window shows the captured signal in detail.
The 3 sign, indicates the kind of signal and the phase of the waveform
that is being zoomed.
Again, with the [ 4 4 4 4] & [3 3 3 3] keys you can move along the ordinate axis,
and see the instantaneous voltage and current.
With [ 5 5 5 5] & [6 6 6 6] keys select the operation to be carried out. After pressing
the [ENTER] key the reverse video mode text indicates that one of the
following operation will be carried out:
− “Adq” : a new waveform is acquired.
− “L1”, “L2” o “L3” : zoom on the waveform of the selected phase.
− “I
N
” : zoom on the waveform of the neutral current. (only in AR5-L
model)
− If the selected phase is marked with the 3 sign, you will next see
the overall harmonic factorization of the selected signal
With the [ESC] key the Setup menu is shown.