CIRCUTOR AR5L Series - Manual (Page 33)

33
The recording conditions are here user-programmed:
RECORD
 PERIOD
TRIGGER
NAME
PARAM
hh:mm:ss ( 1 s to 4 h ).
LEVEL, TIME, OFF.
File name (8 characters) and memory type.
Parameters stored by the analyzer when selecting an STD file
6.1.2.1.- PERIOD: recording period
All values measured by the analyzer can be periodically saved in memory.
The recording period (time period between each record) is user-definable.
Each record consists of the average values measured during the pre-defined
period. This recording period can be from 5 s to 4 h
¡ NOTE! If a period longer than 4 hours is programmed, the display will show
an error message during some seconds:
" xx:xx OUT OF RANGE “