CIRCUTOR DHB Series - Manual (Page 11)

11
5. SERVICE
5.1. Display Description
Fig. 6. Description of the meter frontal plate
5.2. Messages after switching the supply on
After switching the switching supply on, the meter displays the meter
name DHB-3xx and next the program version in the shape „r x.xx” –
where x.xx is the number of the current program version or the number
of a custom-made execution. Next the meter carries out measurements
and displays the value of the input signal. The meter sets automatically
the decimal point position when displaying the value, using prefixes k
– kilo, M – mega. The overflow of alarm thresholds is signaled by highli-
ghting alarm indexes 1, 2, 3, 4 and switching relays (for alarm 3 and 4
–relays are as option). The meter highlights automatically the unit of the
measured value. In case of an error occurrence or any exceeding of the
range value, a message described in the chapter 7 will be displayed
on the display.