CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 13)

5.7 Row labeling
After choosing the row labeling tab, marking can be easily carried out on individual
row. Please ensure that you have selected complete row, since otherwise proper
labeling will not be possible.
The editing field is used to enter the text to be printed on the
row. The characters for each tag must be separated by
commas for example, “ab, cd, ef, symbol, symbol” means print
“ab” on the first tag, “cd” on the second tag , “ef” on the third
tag, "symbol" on the forth tag and "symbol" on the fifth tag .
Clicking OK transfers the labeling to the tags.
5.8 Marking of endless strips
This software has special features for marking of endless strips:
Strip partitioning
Marking complete strip
Marking strip section
Copy a strip
Insert a strip
If you choose strip-material, the above mentioned functions for
sectioning and marking of strips are available on the menu > Edit.
By clicking you can select the strip you wish to mark.
Note: In order to mark a section of strip you have to prepare it first
via menu > Edit > Strip partitioning.
Strip partitioning
You can open a window via > Edit > Strip partitioning which
allows you to divide the strip into various sections.
First put in the width of the strip and then the amount of
elements required in that width and confirm by pressing the
button Append .
Thereafter you can select and add further sections with
different widths.
If you wish to insert a section between other sections you have to mark-out the
section before which you want to insert.
Then press the button Insert to start the process.
You can delete sections by marking-out the section and pressing the Delete button.
At the bottom part of the window you can check strip-length already occupied and the
remaining strip-length.
After completion of sectioning press OK button and the strip will show up with the
corresponding divisions.
12