CONTA-CLIP CONTA-Sign 4.3 User Manual
Page 29
8.4 Example for designing same sized labels for Office Printer
Open the designer from the main menu with > Extras > Labels
> Design label sheets with same size as described above.
The following window appears:
With a click on the button New a new
element can be named in the window under
<Untitled>.
Confirm the new name by clicking on Edit
and the new window for entering the data of
the label will open up.
Take the measurements of the label, the distance between two labels and the start
point from the left and upper side. Enter the data into each field incl. the no. of labels
in x- and y-direction, confirm the entry with Accept and the labels will be shown
as designed.
Please check if all measurements were taken
correctly.
With Close the designer will be terminated. After
selecting from the main menu > New the correct
output device, the designed labels are available
for labeling in the folder
> User defined under > Producer (manufacturer).
28