Rack mounting – CUE ipCUE User Manual
Page 33
9.2.
Rack Mounting
Applicable for ipCUE-alpha, ipCUE-beta, ipCUE-delta, ipCUE-epsilon and not applicable for ipCUE-gamma
and ipCUE-sigma.
The ipCUE Rack Mounting Kit (CS0251-MR) provides simple solution for installing ipCUE controllers the 19”
rack. It allows install two half-rack sized controllers (ipCUEs (ipCUE-alpha, ipCUE-beta, ipCUE-epsilon) or one
controller ipCUE-delta to single 19” unit rack space. All necessary accessories are supplied with the kit.
Controller is fixed to the ipCUE Rack Mounting Kit by two screws M3x6 using threads on the bottom side of
ipCUE. See picture below. Screws M3x6 are bundled to ipCUE Rack Mounting Kit. Don't use longer screws to
avoid damage of PCBs inside controller.
User Manual ipCUE Controllers
Page 33 of 52
Threads M3 for mounting on ipCUE Rack Mounting Kit