CUE ipCUE - Manual (Page 9)

Notes
1. 1000Base-T names are in parentheses.
2. It's important that each pair is kept as a pair. TX+ & TX- must be in the pair and RX+ & RX- must
together in another pair. Just as the table above shows.
3. While 10Base-T and 100Base-TX only uses 2 pairs, please connect all four since 100Base-T4 and
1000Base-T needs them and save you some future debugging.
4. The colors originate from the numbering and name on NIC 1.
5. The connection is based on IEEE Standard 802.3, 2000 Edition.
Using LAN Network
Attach one end of an RJ-45 Ethernet straight-through cable to the ipCUE controller CUEnet (LAN) port and
attach the other end of the RJ-45 Ethernet cable to your computer.
User Manual ipCUE Controllers
www.cuesystem.com
Page 9 of 52