d&b Z5373 T Cluster bracket - Manual (Page 9)

8. Maintenance and care
Storing/transport
The surface treatment temporarily protects the Flying bracket against
moisture. However, ensure the bracket is in a dry state when storing
and transporting it.
During transport ensure the bracket is not stressed or damaged by
mechanical forces. Use suitable transport cases.
Cleaning
Regularly clean and lubricate the bracket using WD-40 ® or a similar
product.
Fig. 4: Threaded inserts in the tie bar
Inspections
To eliminate the potential risk of accident due to malfunctioning of the
bracket, regularly carry out a visual and functional inspection of the
bracket.
If the bracket fails to operate correctly and/or safely, it must be
withdrawn from use immediately.
Carry out a visual inspection of the bracket for obvious deformation
and damage (e.g. cracks and corrosion).
Carry out a visual inspection of the weld strength and the threaded
inserts in the tie bar of the bracket for damage (e.g. cracks and
corrosion).
9. Disposal
Please dispose of this product according to the respective national
regulations.
Ensure that damaged rigging components are disposed of so that they
cannot be used again.
Z5373 Mounting instructions (1.0 EN) Page 9 of 10