d&b Z5374 Ti Flyingadapter - Manual (Page 3)

Z5374 Ti Flying bar
1. Product description
Intended use
The Z5374 Ti Flying bar must only be used in conjunction with d&b
Ti10L loudspeakers for fixed indoor installations as described in this
manual.
The Ti Flying bar allows up to 8 x Ti10L loudspeaker cabinets to be
flown at any vertical splay angle profile.
Scope of supply
Fig. 1:Z5374 Ti Flying bar components
Please verify the shipment for completeness and condition of the items.
Qty. d&b Code Description
1 Z5374 Ti Flying bar [1]
2 Torx lens head screw M5 x 25 [2]
1 Pullback anchor device [3]
3 1 t shackle [4]
1 D2997.INT Mounting instructions
Technical specification
Weight.............................................................................................................1.5 kg (3.3 lb)
2. Safety precautions
General safety
Installation and set up should only be carried out by qualified and
authorized personnel observing the valid national "Rules for the
Prevention of Accidents" (RPA).
It is the responsibility of the person installing the assembly to ensure that
the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the Flying bar
before use. In case you have any doubt as to the proper functioning
and safety of the bar, do not use it. Please also refer to section 5.
Maintenance and care on page 8.
Load safety information
The maximum permitted working load of the Ti Flying bar is
90 kg
(198 lb) which corresponds to the weight of up to 8 x Ti10L
loudspeakers.
Z5374 Rigging manual (1.0 EN) Page 3 of 10