d&b Z5374 Ti Flyingadapter - Manual (Page 6)

- Attach the circlip to the fixing bolt.
WARNING !
Safety-relevant item
- Recheck your work and ensure the circlip is securely fitted.
- Slide out the Front hooks on both sides of the cabinet into the track
of the front bar of the Flying bar.
- Insert the supplied Torx lens head screws M5 x 25 on both sides.
- Tighten the screws to a torque of 3 Nm.
3. Suspend the current assembly
- Suspend the current assembly according to your chosen type of
suspension to allow further cabinets to be added. (Refer to the
previous section 3. Suspension of the Flying bar/array on page 4)
Z5374 Rigging manual (1.0 EN) Page 6 of 10