Future Automation ML - Manual (Page 8)

In
st
al
la
ti
o
n
:
S
ta
ge
3
Page 7 of 20 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
ML - Heavy Duty Lift Mechanism
Fixing the Lift to the Cabinet
With the top properly located, use the 8 pointed screws supplied, 4 on
each side, to pin the mechanism in place, fixing its position left and right.
These 8 screws should be screwed through the middle hole of each of
the clusters of 3, shown.
With the lift fixed in position, use 8 wood screws on each side to secure
the lift to the cabinet.
Place the mechanism within the cabinet.
Raise the beam to the top and carefully
guide the base through the opening.