Future Automation SPS - Manual (Page 16)






In
st
al
la
ti
o
n
:
S
ta
ge
9
Page 15 of 28 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
Option B - Mounting the Screen Advance Heavy Unit
With the screen removed, offer the SAH unit into the enclosure and in the correct position.
Fix securely in place and make sure the mechanism is square to the enclosure void.
SPS SPLIT V & H - Sliding Panel System Split Vertical & Horizontal
Putting a packer under the SAH would
help support the mechanism at the right
height when securing to the rear face.
To adjust the SAH advance distance either slide the top mount plate on the slots or alter
the crank length by loosening the bolts and slide longer or shorter.
Finally you can adjust the distance by rotating the cams, adjust with caution.
Top Mount
Plate
Crank
IN Cam
OUT Cam