Future Automation SPS - Manual (Page 20)




In
st
al
la
ti
o
n
:
S
ta
ge
1
3
Page 19 of 28 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
Panel Open Adjustment
To adjust the open panel position loosen the 2 bolts shown in the detail view. Do not
fully remove them. Sliding the switch plate up will make the panels split further apart and
sliding it down will split less. The panel will travel approximately 3 times the distance the
switch plate moves. Once desired height position is set tighten the bolts back up.
SPS SPLIT V & H - Sliding Panel System Split Vertical & Horizontal
PANELS
OPEN
PANELS
CLOSED
Moving Panel
Mechanism Master