Controllers, Dmx controller, Installation – ILUMINARC Ilumipod™ 18g2 IP User Manual

Page 13

Advertising
background image

Installation

Ilumipod 18g2 IP Optic RGB User Manual (Rev. 2)

9




If you have not
configured the
DMX starting
address and

DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.







Controllers

The Ilumipod 18g2 IP Optic RGB can operate with a standard DMX controller or the
ILUMICODE ADDRESSER. The sections below provide information on how to connect these
products to the corresponding controllers. The instructions to operate these products with each of
the above controllers are in the

Operation

chapter of this manual.

DMX Controller

The Ilumipod 18g2 IP Optic RGB can work with a standard DMX controller. The
channel assignments will depend on the chosen personality (see the corresponding

Menu

Map

section) and the DMX address assigned to each product (see the

Programming

section).

The figure below illustrates how to connect the DMX controller to the Ilumipod 18g2 IP
Optic RGB.


































Advertising