ILUMINARC Ilumipod™ 18g2 IP - Manual (Page 16)

Operation
12 Ilumipod 18g2 IP Optic RGB User Manual (Rev. 2)
DIM1 is the
fastest dimming
curve and DIM4
is the slowest.
Static Colors
1. Go to STATIC.
2. Select a color or effect (RED, GREN, BLUE, or STRB).
3. Select a color value (000~255) or a strobe frequency (00~20).
Dimmer
This setting gives the user four different options to simulate the dimming curve of an
incandescent lighting product.
1. Go to DIMMER.
2. Select a dimming curve (OFF or DIM1~4).
Procedure:
DIMMER Description
OFF Dimmer curve is linear with fader
DIM1 Non-linear (fastest)
DIM2 Non-linear (fast)
DIM3 Non-linear (slow)
DIM4 Non-linear (slowest)
Color
1. Go to SETTINGS > COLOR.
2. Select the color method (OFF, RGBTOW, or UC).
Details:
OFF
When the RGB faders are all set to “255”, the output is maximum.
RGBTOW
When the RGB faders are all set to “255”, the output is the selected White color
(see Whites Setting).
UC
When the RGB faders are all set to “255”, the output matches the same color
output of previous versions of this product.
Whites Setting
1. Go to CALIB.
2. Select a white color (WHITE 1~11) or RGB TO W.
3. Select an RGB color (RED, GREN, or BLUE).
4. Configure the color value (000~255).
5. Repeat steps 3 and 4 for the other RGB colors to obtain a white color.
6. Repeat steps 2 through 5 for the other white colors.
Reset to Factory Settings
1. Go to SETTINGS > RESET.
2. Select an option (YES/NO).