KBC Networks MiniLink - Manual (Page 12)

TRANSMITTER OPERATION
A. HOW TO SETUP THE TRANSMITTER
1. LOCATION / MOUNTING
Mount the Transmitter against a flat surface for support and stability. It is not
weatherproof and should be mounted in an environmental enclosure if used outdoors or
in a harsh environment.
2. POWER
The MiniLink is powered by a 6-14.5 VDC power supply connected to the Power In
connector on the rear of the case of the directional transmitter or the 4 pin plug of the
omni-directional transmitter. The transmitter incorporates internal reverse voltage
protection.
3. CHANNEL SELECT
Channel selection is accomplished by programming the 4-position dipswitch located at
the rear panel of the directional transmitter and on the front of the omni-directional
transmitter. Switch and frequency settings are listed on the label below the switch access.
4. AUDIO SELECT
Audio mode selection is enabled by programming the 2-position dipswitch located at the
rear panel of the directional transmitter and on the front of the omni-directional
transmitter. Switch settings are listed on the label adjacent to the switch access.
The Audio In connector can be used for either line or microphone input levels. If an
electret microphone is used, the second switch position can be selected to supply +5 V to
the electret element. The +5V microphone supply should be disabled for dynamic
microphone or line input uses.
5. ORDER OF SETUP AND OPERATION
• Select Frequency and Audio mode. (Factory set to channel 10)
• Connect Power, Video and Audio inputs to transmitter.
• Position transmitter for desired polarity using rear label arrow as a reference,
transmitter and receiver polarity must match one another.
A. MAINTENANCE
Your KBC product is an example of superior design and craftsmanship. Use the system
only within the environmental specifications indicated. High temperatures can shorten the
life of electronic devices and melt plastic parts. Excessive mechanical shock can damage to
the case, connectors or internal circuit board and void the 2-year warranty.
- 10 -