KBC Networks Mesh2HT - Manual (Page 43)

Mesh2HT User Manual
Manual-MESH2HT-Rev1311
Copyright © KBC Networks 2012
Page 43 of 59 www.kbcnetworks.com
mapping uses ping to the gateway as a mechanism for a low bandwidth means to
confirm system connectivity. If the system map were to be viewed from outside the
network, then this will be an actual gateway.
Step 2:
Once the Mesh2HT system can been configured and properly connected, a
generic system map will be drawn like the one below:
Set this to a pingable
network device