KBC Networks EE1CL - Manual (Page 8)

Extended Ethernet User Manual
Manual-EE1CL_Series-Rev1208
Copyright © KBC Networks Ltd. 2012
Page 8 of 17 www.kbcnetworks.com
2.3 Installation Method
2.3.1 Compact
• Remove all packaging material
• Attach network and coaxial video cables as required
• Set DIP switch as required – see section 2.6
• Attach power to the 5Vdc power jack
See section 2.8 for LED status.
2.3.2 Rack-mount
• Remove all packaging material
• Place the EE1CL unit on a flat surface with the front panel facing
• Slide the unit into the slot of the converter chassis
• Attach a rack-mount bracket to either side of the converter chassis with
screws supplied
• Attach the brackets to the rack
• Attach network and coaxial cables as required
• Set DIP switch as required – see section 2.6
See section 2.8 for LED status.