KBC Networks EE2CL - Manual (Page 3)

Extended Ethernet User Manual
Manual-EE2CL_Series-Rev1304.docx
Copyright © KBC Networks Ltd. 2013
Page 3 of 19 www.kbcnetworks.com
1 Overview
1.1 Introduction
This manual covers the EE2CL series. These units make it possible to upgrade
installed analogue cameras to high-quality digital IP cameras without the
expense of replacing existing coaxial cabling. Units are available in an extended
temperature range, compact wall-mount format that fits inside most camera
housings and can also be mounted into a 19” rack unit.
1.1.1 EE2CL
The KBC EE2CL series is a 10/100, IEEE 802.3 af/at PoE compliant, Ethernet line
driver providing excellent repeatable performance for today’s CCTV systems. The
line driver provides connectivity for up to four, 10/100Mbps IEEE standard twisted
pair copper port over a 75 Ω coaxial cable interface allowing new IP technology to
pass over existing legacy cable up to a distance of 1.5km
(1)
. The units are ‘Plug and
Play’ and are automatically configured for straight forward installation. Maximum
data rates of up to 100Mbps are achievable.
1. Transmission distances are for indication purposes only. Actual achievable transmission distances on site will depend on cable
type installed, quality and age of installation