Matrix routing status, System setup menu, Setup menu navigation – NeoPro Tahoe-Veo User Manual
Page 15: Setup menu options
DOC42-00035-A-Tahoe_Integrators_Guide.doc
15
Matrix Routing Status
OUTPUT 1
IN: 07
Starting from the home screen, you may view the connection status of the matrix
inputs and outputs by using the and
arrows. The front panel display steps
through the outputs, and will display what input source is currently routed to
each output.
Use the Power or Exit Button to exit and return to the home screen. The output
status display will close automatically after a 30 second period where no buttons
pressed.
System Setup Menu
SET: Panel LED
ON
From the home screen, pressing the Setup button will take you into a series of
setup options as listed below.
Setup Menu Navigation
Setup Menu Navigation
Key
Enter the setup menu
SETUP
Navigate through the setup menu items by pressing
left and right arrows. Going to the next item auto-
saves and immediately applies any changes made to
the item.
and
Modify the setup item with the up and down arrows.
and
Closes the setup menu without saving changes (of the
current item)
POWER or
EXIT
Save changes to the setup item and exit
SELECT
Setup Menu Options
Setup Item
Description