NeoPro Tahoe-Veo - Manual (Page 17)

DOC42-00035-A-Tahoe_Integrators_Guide.doc 17
Setup Item Description
SET: FaultMode
If a power supply or fan fault occurs but later goes
away, the STICKY setting allows the home screen
to continue to alert the users. SELF-CLEAR
(default) will stop the alert automatically, however
you may not be aware of intermittent faults this
way.
SET: DebugMode
This setting is an information menu where you can
look at the parameters that are monitored by the
system. There are no changeable settings in this
section.
SYSCODE
– This is a hexadecimal value that will
only have meaning to NeoPro technical support.
P/S A
– displays current voltages from top power
supply A
P/S B
– displays current voltages from bottom
power supply B
FAN A
– displays RPM from top power supply A
fan
FAN B
– displays RPM from bottom power supply
B fan
Memory Features
Memory RECALL
Slot 1st Digit
The system memory can have 16 preset ‗scenes‘ that can be recalled from the
front panel or IR remote. To ensure the system does not get reprogrammed by
untrained and unauthorized personnel, the memory functions cannot be changed
from the front panel buttons, however they can be stored using the IR remote.
To recall from a memory location from the IR remote, simply press the ‗Play‘
button and the two digit memory slot number.
+ X X
To recall from a memory location using the front panel, simply press ―MEM‖
and the memory slot number: