Installing a so-dimm memory module – NEXCOM NIFE 100 User Manual
Page 49
Advertising
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
35
NIFE 100/101 User Manual
Chapter 3: System Setup
Installing a SO-DIMM Memory Module
Remove the bottom cover before installing a SO-DIMM module.
1. Remove the HDD bracket to access the SO-DIMM socket beneath.
HDD
bracket
2. Insert the SO-DIMM module into the socket at an approximately 30
degrees angle.
3. Push the module down until it slips into the socket and a clicking sound
is heard.
Advertising