Installing a 2.5” sata hard drive – NEXCOM NIFE 100 User Manual
Page 55
Advertising
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
41
NIFE 100/101 User Manual
Chapter 3: System Setup
Installing a 2.5” SATA Hard Drive
2. Place the 2.5” HDD into the HDD bracket with the connectors facing
towards the opening, then use the screws to secure the drive in place.
Remove the bottom cover before installing a SATA HDD.
1. Locate the internal HDD bracket and remove all the screws on the bracket.
Connectors
Advertising