Appendix c: watchdog timer setting, C: w, Ppendix – NEXCOM NIFE 100 User Manual
Page 80: Atchdog, Imer, Etting, Ite8786 watchdog programming guide
Advertising
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
66
NIFE 100/101 User Manual
Appendix C: Watchdog Timer Setting
a
PPendIx
C: w
atChdoG
t
Imer
s
ettInG
ITE8786 WatchDog Programming Guide
#define SUPERIO_PORT 0x2E
#define WDT_SET
0x72
#define WDT_VALUE
0x73
void main(void)
{
#Enter SuperIO Configuration
outportb(SUPERIO_PORT, 0x87);
outportb(SUPERIO_PORT, 0x01);
outportb(SUPERIO_PORT, 0x55);
outportb(SUPERIO_PORT, 0x55);
# Set LDN
outportb(SUPERIO_PORT, 0x07);
outportb(SUPERIO_PORT+1 ,0x07);
# Set WDT setting
outportb(SUPERIO_PORT, WDT_SET);
outportb(SUPERIO_PORT+1, 0x90);
# Use the second
# Use the minute, change value to 0x10
# Set WDT sec/min
outportb(SUPERIO_PORT, WDT_VALUE);
outportb(SUPERIO_PORT+1, 0x05);
#Set 5 seconds
}
Advertising