Installing a mini-pcie module (full-size) – NEXCOM NIFE 100 User Manual
Page 52
Advertising
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
38
NIFE 100/101 User Manual
Chapter 3: System Setup
1. Locate the mini-PCIe slot on the board and remove the mini-PCIe bracket.
Installing a Mini-PCIe Module (Full-Size)
Mini-PCIe
slot
2. Insert the mini-PCIe module into the mini-PCIe slot at 45 degree angle
until the gold-plated connector on the edge of the module completely
disappears into the slot.
Advertising