Oxmoor SPOT-1 - Manual (Page 3)

Page 1
SPOT-1 INTRODUCTION
• Discreet, unobtrusive H7TCP style recessed enclosure
• Fully gasketed junction box
• Fully adjustable hanger for 24” joists
• Plenum Approved flexible metallic tubing and connectors
• 72- diode array for “spot” coverage
• IR bandwidth from 95 kHz through 3 mHz
• Energy saving feature when operating at 95 kHz and 250 kHz
• UL and Plenum listed
Oxmoor Corporation, LLC’s SPOT-1 Infrared Emit-
ter Panel simplifies the design requirements for In-
frared transmission in small facilities. This Infra-
red Emitter Panel is ideal for applications where
discreet, unobtrusive IR systems are required.
The 72-diode array is designed to cover small “spot”
areas of approximately 314 to 2,800 square feet. It
is ideal for use in hotels, courtrooms, classrooms,
museums, and other facilities of this type.
SPOT-1 is housed in a standard Halo H7TH 6-inch
recessed ceiling light enclosure. The enclosure
comes with the Halo 70PSH trim ring and lens and
provides for easy installation in most types of over-
head ceiling.
SPOT-1 has an IR transmission bandwidth from
95 kHz through 3 MHz. It requires a single AC
power connection between 100 VAC and 230 VAC,
and a modulated RF connection made through a
BNC style connector. With an input impedance of
25 k ohms at 95 kHz, multiple units can be series
and driven from a single modular channel.
SPOT-1 provides an automatic on and off feature.
When using either a 95 kHz or 250 kHz carrier
frequency (the standard frequencies used for hear-
ing impaired applications) an internal jumper can
be set to detect the 95 kHz or 250 kHz kHz carrier
frequency. The unit turns itself off when the carrier
frequency is not present. This feature greatly
extends the life of the emitter panels.
SPOT-1 can be used with any standard IR Receiver
that operates between 95 kHz and 3 MHz.
The Emitter Panel is ideal in applications where
adjacent rooms open into one large room, as in a
room combining application. The panels can be
synchronized by using the Oxmoor PIR-88M Eight-
Channel Programmable Infrared Modulator.
For more information on any Oxmoor product, please contact
the Oxmoor Sales Department. Or download complete prod-
uct brochures and manuals at our website: www.oxmoor.com.