Televes Coaxdata 1Gbps-HDTV COAX+PLC 1ETH+1SFP - Manual (Page 5)

Televes
®
5
Introduction
Modem Ethernet over Coaxial. CoaxDATA 1Gbps-HDTV
The CoaxData 1Gbps-HDTV can transmit IP data over coaxial cable installations with coexistence of
TV channels or other existing services. The Coaxial Ethernet modem immediately connects multiple
PCs on the coaxial network or powerline on your home, hotel or buildings without additional cabling.
Televes provides two variants of product:
The Ref.769201 CoaxData ™ 1Gbps-HDTV incorporates power supply, two "F" connectors for TV and
data connectors and two RJ-45 Ethernet 1000BASE-T/100BASE-TX/10BASE-T
The Ref.769202 CoaxData ™ 1Gbps-HDTV incorporates an Ethernet 1000BASE-/100BASE-TX/
10BASE-T and a SFP (According to MSA INF-8074i specification of the SFF Committee). This
connector allows you to use Gigabit modules 1000BASE-LX/1000BASE-SX/ 1000BASE-CX or built-in
SFP devices that support new protocols like EPON (IEEE 802.3ah) or GPON (ITU G.984) to CoaxData
integration in fiber optic networks.
The Ref.769203 CoaxDATA ™ 1Gbps-HDTV 1xETH
incorporates power supply, two "F" connectors for TV
and data connectors and one RJ-45 Ethernet 1000BASE-T/100BASE-TX/10BASE-T. Only supports coaxial
medium.
Ref.769201 CoaxData™
1Gbps HDTV
Ref.769202 CoaxData™
1Gbps HDTV c on SFP
Ref.769203 CoaxData™
1Gbps HDTV 1xEth
Main Features
 Connect your computer to the Internet access services, using existing wiring in your building.
 Easy installation, no need to open the computer or install any software driver.
 2xLED to indicate the status of the modem.
 2xEthernet (Ref.769201) or 1xEthernet (Ref.769202 or 769203) 1000 BASE-T/100 BASE-TX/
10 BASE-T to allow connection to multiple computers in your home to Gigabit speeds: PC,
game console, printer, STB (Set-top Box).
 1xSFP (Ref.769202) de 1Gigabit that enables the connection of modules plugables fiber optic
or copper network to extend the data.
 IEEE 1901 Compliant with HomePlug AV PHY that supports 2880 OFDM carriers with
4096/1024/ 256/64/16/8 QAM, QPSK, BPSK and ROBO mode capable of transmitting up to
700 Mbps and up to 350 Mbps physical rate of rate UDP over coax.
 Operating bandwith in the return channel 2 to 67,5 MHz with a maximum attenuation of 85
dB supported. No requirement of minimum attenuation. Reach distances greater than 1km
EN
www.televes.es