Televes Coaxdata 1Gbps-HDTV COAX+PLC 1ETH+1SFP - Manual (Page 8)

CoaxData 1Gbps-HDTV Ref.769201/Ref.769202
8
Data Input. TV + Data
Input F female connector for data and TV, directly from the TV outlet.
Output TV. TV
Output F female connector for TV services and channels.
Factory Defaults Button (Factory Settings )
Pressing Factory Defaults button on the front of device at least three seconds, that the modem will load
the default configuration from the factory.
 Factory default button delete all user configuration and set default factory configuration. Be
careful when using this button because if modems are configured on MxU mode, this button
will remove that setting and set defaults operating mode HomeNetworking.
 CoaxManager™ Advanced Features can disable factory button so that user settings cannot
remove when press button
Medium Switch
On the front is a switch to switch between only coaxial medium (right) and hybrid mode (left) where signal
is transmited on coaxial and powerline mediums. Signal is always transmitted on the coaxial.
Adapter LEDs
Hybrid/Coaxial Medium LED
LED indicating the selected transmission medium through the front switch
• Coaxial: Green . Only connected via coaxial cable
• Hybrid: Orange . Connected to both coaxial media + PLC.
EN
www.televes.es