Top Global MB8000 User Manual
Page 16

Top Global USA. ----MB8000 User Guide
- 15 -
3.3.2.1 Wireless Internet
Configuration varies by wireless card. As Figure 3-3 shows, the wireless card’s
type is CDMA.
Figure 3- 3 wireless Internet
z
Card
status: Enable or disable the wireless card status. When CDMA and EVDO
card is used, the default value is Enabled, otherwise , Disabled.
z
Connect
Type: Indicates the wireless card’s type: CDMA, EVDO, GPRS, or
UMTS.
z
Phone
Number: This parameter is used to provide a phone number for modem.
z
User
Name: This parameter is used to provide a user name for modem.
z
Password: This parameter is used to provide a password for modem.
z
Init
string: This parameter is used to provide an initialization string for modem.
z
Dial
Mode: Dial on demand or dial on startup, the default value is dial on startup.
z
Auto Disconnect Timer: The time in minutes for the MB8000 automatically
disconnect from Internet if no data transmission between MB8000 and Internet
when MB8000 in Dial on demand mode. The default value is 30.
z
Remote
IP
Negotiation: Enable or disable MB8000 to negotiate with service
provider to get peer IP address.
z
Primary DNS Negotiation: Enable or disable MB8000 to negotiate with service
provider to get primary DNS address.
z
Secondary DNS Negotiation: Enable or disable MB8000 to negotiate with service
provider to get secondary DNS address.
z
Local WAN IP Negotiation: Enable or disable MB8000 to negotiate with service
provider to get local WAN IP address.