UEBO S400 - Manual (Page 10)

UEBO S400 User Manual
2-1
Chapter 2 UEBO Web Manager
Configuration
2.1 Overview
Description
This chapter provides the methods for the UEBO S400 configuration through the
introduction to the UBOX Manager configuration.
2.2 Initial Settings
Default Setting
In the default setting, the actual IP address of the eth1 is 192.168.0.100 while the IP
address of the eth2 is set to be the IP address obtained by the system automatically.
Connect the first network port to the Ethernet and ensure that the IP addresses of the
client and UEBO S400 are at the same network port. Start the UEBO S400, enter
192.168.0.100, and then log in to the UEBO Web Manager.
Login Interface
The login interface of the UEBO Web Manager is as follows:
The default login name and password is admin and 123456. Presently, Chinese and
English version pages are available.