Vectronics VEC-830K - Manual (Page 2)

VEC-830K Instruction Single Side-Band Filter Kit
INTRODUCTION
Thank you for purchasing the VEC-830K Single Side-Band Filter kit. The
VEC-830K is a four stage, switch selectable filter, that will make "cleaning
up" Single Side-Band signals effortless and easy. With the VEC-830K you
bring up any hard to hear signal out of a "band pile up," for easy listening, or
get rid of unwanted, annoying signals.
The VEC-830K also features a
headphone output that will allow the use of standard mono headphones.
Although small in size, the VEC-830K is high on performance and reliability.
Powered from a 9volt transistor batten', the VEC-830K will provide you with
many hours of use.
TOOLS AND SUPPLIES
Construction Area: Kit construction requires a clean, smooth, and welllighted
area where you can easily organize and handle small parts without losing them.
An inexpensive sheet of white poster board makes an excellent construction
surface, while providing protection for the underlying table or desk. Well-
diffused overhead lighting is a plus, and a supplemental high intensity desk
lamp will prove especially helpful for close-up work. Safety is an important
consideration. Be sure to use a suitable high-temperature stand for your
soldering iron, and keep the work area free of combustible clutter.
Universal Kit-building Tools: Although your particular kit may require
additional items to complete, virtually all construction projects require a work
area outfitted with the following tools and supplies: