Vectronics VEC-830K - Manual (Page 7)

EC-830K Instruction Manual Single Side-Band Filter Kit
PARTS LIST
Your kit should contain all of the parts listed below. Please go through the parts
bag to identify and inventory each item on the checklist before you start building.
If any parts are missing or damaged, refer to the warranty section of this manual
for replacement instructions.
If you can't positively identify an unfamiliar
item in the bag on the basis of the information given, set it aside until all other
items are checked off. You may then be able to identify it by process of
elimination. Finally, your kit will go together more smoothly if parts are
organized by type and arranged by value ahead of time. Use this inventory as an
opportunity to sort and arrange parts so you can identify and find them quickly.
© Qty Part Description Designation
2 100K ohm resistor (brown-black-yellow-gold) R2,R3
2 150K ohm resistor (brown-green-yellow-gold) R4,R5
2 240K ohm resistor (red-yellow-yellow-gold) R6,R7
1 300K ohm resistor (orange-black-yellow-gold) R1
2 1.2M ohm resistor (brown-red-green-gold) R8,R9
5 1000 pF ploysterene capacitor (1000J) C1,C2,C3,C4,C
3 470pF ploysterene capacitor (470J) C6,C7,C8
1 10 uF electrolytic capacitor (IOuf) C9
2 LM747 Op Amp IC Ul, U2
2 14-Pin Low Profile IC Socket For U1, U2
1 4P4T Slide Switch SW1
8 6" insulated wires Circuit wiring
2 4-40 x 1/4" Phillips Machine Screws
1 9-volt battery snap; 8" GND, VCC
1 Single Sided PC board VEC-830K
1 Instruction Manual