WaveWare comPPage DVIF-10 - Manual (Page 3)

Alarm Interface Utility Software V3.1.3
DRY VOLTAGE INTERFACE 10
DVIF10
The Dry Voltage Interface 10 (DVIF10) is an alarm contact input device with 10 inputs that is PC programmable by the
user, using the supplied Microsoft Windows™ compatible software program. The DVIF10 will accept Dry (no voltage)
contact closure or Voltage, high or low, input. Voltage input range is 1 to 24 volts AC or DC. Each input is fused to
protect the inputs in case voltage is applied to a contact input that has been configured for no voltage.
Each contact can be configured for a different individual pager ID (cap code), Alert type (A, B, C, or D) and repeats
ranging from none, 1-4, or until Change of State. Time interval between repeats can be select from 1 minute to 59
minutes. The paging protocol is a global setting of either Scope
™ or Motorola ™ COMP2. In addition the user can select
to send either Alphanumeric or Numeric messages.
The DVIF10 can be daisy chained together via RS485 Cat 5 RJ45 cabling to support up to 40 contact inputs.
The Dry & Voltage Interface program will run on Microsoft Windows
™ XP home or professional and the new Vista.
comPPage’s DVIF10 is a unit that was Designed, Developed and Manufactured in the USA. Each unit has a Limited
Lifetime Warranty.
3