Zilog S3F80QB - Manual (Page 10)

UM026703-1014 Start the Ledblink Sample Program
S3F80QB Development Kit
User Manual
7
Start the Ledblink Sample Program
The S3F80QB Development Kit includes a sample program that demonstrates an LED
blinking application. To get started with the S3F80QB Ledblink sample program, observe
the following procedure.
1. Launch ZDS II by navigating from the Windows Start menu to Programs
→
Zilog
ZDS II – S3 <Version>
→
ZDS II – S3 <Version> .
2. From the File menu in ZDS II, select Open Project as indicated in Figure 7, and navi-
gate to the following filepath:
<ZDS Install>\samples\S3F80QB\ledblink_asm
Figure 6. The Completed ISP and Development Board Assembly