Zilog S3F8S19 User Manual
Page 31
Advertising
UM026801-0914
Run the S3F8S19 Monitor Demo
S3F8S19 Development Kit
User Manual
28
6. From the
Build
menu, select
Set Active Configuration
to open the Select Configura-
tion dialog box.
7. Select
Debug
, then click
OK
to close the Select Configuration dialog box.
8. From the
Project
menu in ZDS II, select
Settings
to open the Project Settings dialog
box. In the Project Settings dialog box, click the
Debugger
tab.
9. On the Debugger page, select
S3FlashIsp
from the
Target
list, then select
S3FlashIsp
from the
Debug Tool
drop-down menu, as shown in Figure 31.
Figure 30. Select the S3F8S19_Mon_Demo.zdsproj Project
Advertising