Zilog S3F8S19 - Manual (Page 9)

UM026801-0914 Start the S3F8S19 Ledblink Sample Program
S3F8S19 Development Kit
User Manual
6
After completing the procedure to connect the S3F8S19 Development Board to the PC,
the complete setup appears as shown in Figure 6.
Start the S3F8S19 Ledblink Sample Program
The S3F8S19 Development Kit includes a sample program that demonstrates an LED
blinking application. To start the S3F8S19 Ledblink sample program, observe the follow-
ing procedure.
1. Launch ZDS II by navigating from the Windows Start menu to Programs
→
Zilog
ZDS II – S3 <Version>
→
ZDS II – S3 <Version> .
2. From the File menu in ZDS II, select Open Project as indicated in Figure 7, and navi-
gate to the following filepath:
<ZDS Install>\samples\S3F8S19\ledblink_asm
Figure 6. The Completed ISP and Development Board Assembly