Adept AdeptSight Reference Guide - Manual (Page 314)

LoadCameraSettings
VPARAMETER
10306
This command code is not directly supported in AdeptSight 3.x at this time. Please
contact Adept Technical Support for programming options.
Loads the selected camera settings file to the selected camera device. The valid format for a camera
settings file is hscam.
Type
Long
Example
See SaveSequence for an example of the syntax and the use of all Load and Save properties.
Related Topics
SaveSequence
SaveCameraSettings
LoadCameraSettings
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 314