Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 16)

Com2 Settings
Item Function Options Adtec API
Commands
Com2
Settings RS-232 terminal monitor for
communicating with the internal
host motherboard for diagnostics
115200 8 1 NONE
57600 8 1 NONE
38400 8 1 NONE
19200 8 1 NONE
9600 8 1 NONE
default is 38400 8 1
NONE
*.SYSD com2
Firmware Version
Item Function Options Adtec API
Commands
Firmware Displays current version of firmware
(read only) N/A *.DPID BAN
Decoder Menu
The following diagram illustrates the structure and flow of the Decoder Menu on the Adtec Soloist HD Pro
device. This menu gives you access and control to the unit's handling of digital video and audio, and
multicasting for these elements.
Decoder Status
Item Function Options Adtec API
Commands
Decode
Status Displays current playout status
(read only) N/A *.DPID TRA
Display Target
Item Function Options Adtec API
Commands
Display
Target
Television resolution; set to match
resolution of the intended display;
unit will scale up/ down to match.
See Supported
Targets below
*.DCMD VID