Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 76)

Communications Port Interface Adapter
DB9 Female RJ45 Notes
1 NC No Connect (NC)
2 6 Receive Data (RXD)
3 5 Transmit Data (TXD)
4 1 Data Terminal Ready (DTR)
5 4 Ground (GND)
6 3 Data Set Ready (DSR)
7 7 Request to Send (RTS)
8 8 Clear to Send (CTS)
Appendix D - Technical Specifications
Video
● Video Outputs: One decode configurable to SDI, HDMI, Composite (BNC).
● Sources: ASI, GigE or Internal Hard Drive
● Decode Up and Down conversion SD to and from HD
● Error concealment and de-blocking filter.
● Video aspect format: Auto, 4x3 or 16x9
● Back to back frame accurate playback from same output port.
Standard Definition (SD) Decode
● Maximum bit rate: 15 Mbps
● MPEG2 SD MP@ML, Full D1. NTSC, PAL B, G.
● MPEG4.2 ASP@L5, Full D1. No global motion compensation.
● MPEG4.10 (AVC/H.264) BP@L3 up to 720X480p30 or 720X576p25 resolution, including FMO and
ASO.
High Definition (HD) Decode
● Maximum bit rate: 25 Mbps
● MPEG2 MP@HL up to 1920X1080i60 or 1080i50 resolution.
● MPEG4.10 (AVC/H.264) [email protected] and [email protected] up to 1920X1080p24 or 1080i50 resolution.
Audio
● Audio Outputs: S/PDIF digital audio (RCA female), Analog audio on balanced stereo 5 Pin RST,
HDMI, SDI Embedded stereo audio pair per SMPTE 272M (SD) or SMPTE 299M (HD) based on
target video resolution
● Simultaneous embedding on HDSDI, HDMI and Analog balanced output